Fixing Turbo Hose Problems on Ford 6.0 Diesel

Discussion in 'General RVing' started by jbsurfs, Aug 30, 2009.

  1. jbsurfs

    jbsurfs New Member

    Before putting a new hose on, I cleaned the turbo surface with laquer thiner then applied "Hi Tack" gasket goop(red) from Permatex (available at NAPA). I put CT clamps on(constant tork(?) also available from NAPA. So far so good! This is the same setup I have on a couple of 450 Cummins turbos on my boat.
     
  2. brodavid

    brodavid Senior Member

    Re: Fixing Turbo Hose Problems on Ford 6.0 Diesel

    good job, and welcome to the forum
     

Share This Page