Dash Air brake Switch for 2013 Tiffin


Patyacht

New Member
I am new to this forum and have a Air Brake Switch issue. I have a 2013 Tiffin 36GH and when I went to push the brake switch in, it broke loose from the inside of the dash and pushed into the dash without releasing the brakes. Has anyone heard of this before? I told that it is a special order plastic part from Tiffin. I'm near Sheridian Wyoming and any help would be greatly appreciated.
 

Patyacht

New Member
I fixed the issue. The Parking Brake Controller is held on by a large 1 3/8" nut that backed off. To fix the issue, I removed the 8 small screws holding the gray dash panel cover. I then raised the panel away from the tan dash enough to see in between the 2 plastic pieces. That is when I saw the large nut that had come loose. After tightening the nut I applied some blue Lock Tight!
 

Attachments

  • MTR BRAKE SWITCH (Small).JPG
    MTR BRAKE SWITCH (Small).JPG
    102.6 KB · Views: 0
Top