I'm having some minor (I hope) problems with the coach.
First a couple of days ago about Tuesday this past week I fired up the
coach and after letting it run for awhile to bill up the air pressure
the tranny would not engage. It's a Cummins 325 Turbo, Allison MD 3060
6 speed. Push button shifter. Only code I can get is a 7-0 which by the book is sump pump temp too low.
Twice in the past few days it worked, but then this am no go, even
after warm up, SOS. I have looked online, checked the fluid at the
tranny, and the shifter, fluid is at bottom of hot safe range, good
according to the book. Checked the jacks, fluid for the jacks,
everything as far as I can tell is OK, Nothing that I can come up with
as to why it's acting up.
Thanks in advance for any info you may provide.
Bummed out.
Roy
First a couple of days ago about Tuesday this past week I fired up the
coach and after letting it run for awhile to bill up the air pressure
the tranny would not engage. It's a Cummins 325 Turbo, Allison MD 3060
6 speed. Push button shifter. Only code I can get is a 7-0 which by the book is sump pump temp too low.
Twice in the past few days it worked, but then this am no go, even
after warm up, SOS. I have looked online, checked the fluid at the
tranny, and the shifter, fluid is at bottom of hot safe range, good
according to the book. Checked the jacks, fluid for the jacks,
everything as far as I can tell is OK, Nothing that I can come up with
as to why it's acting up.
Thanks in advance for any info you may provide.
Bummed out.
Roy