Hi all: We just bought a Sunnybrook Sunset Creek (love it!). Went through the walkthrough at the dealership and all was well. Got down the road to the 1st stop of the trip home and no airconditioner or fridge (as well as other items). To make a very long story short, my husband figure out the guy at the dealership put the positive cable on the negative plug and vice versa on the battery (had to push the "in" button to get the slideout to go out). Anyway, we replaced fuses in the breaker box and the converter. Had to buy a new battery. The situation now is that even if we are plugged in anything over 12 V doesn't work and the battery isn't getting recharged - once it's dead - it's dead. Also, at one point we were stuck with the slide-out in the out position and no power to pull it in. We were told we could hook up to the tow vehicle and get the slide-out in. Didn't work. The dealership is sending a new converter because you can hook up an amp meter to the positive and negative cables that normally go on the battery and there is no power. Once we replace the converter, and have already replaced fused in the breaker box, is there anything else we should check for so we don't end up finding things down the road caused by this? Someone suggested a fuse in the truck may have blown and that's why the tow vehicle didn't give power to get the slide-out in, but we didn't find a fuse for the power cable (2002 Ford F-150). We think the converter will do the trick, but just putting the question out there to those with a little more experience than us!
Thanks in advance for any input.
Sandy (a/k/a "Sam") :blush:
Thanks in advance for any input.
Sandy (a/k/a "Sam") :blush: